Know exactly where
your energy goes
All types of metering, power quality, AMR and billing. Measure and visualise energy use across your whole estate, then turn that data into lower costs and lower carbon.
Visibility is the foundation of energy reduction
With energy costs rising, businesses need to understand exactly how they use power. By measuring and visualising the energy patterns of the whole building and each key process, you can start making impactful decisions that cut energy, cost and carbon.
In our experience, substantial savings are often possible from even basic monitoring data. The critical part is continuing to monitor long-term: new insights keep emerging, and savings measures that were put in place can quietly drift over time.
Changes in hardware and turnover in staff leave gaps in process and knowledge. A Go Monitor system baselines your usage and alerts you the moment inefficiencies start to creep back into your organisation.
Start with the big picture
Visualise how your whole building, business park or international estate is using and generating energy. High-accuracy monitoring at this level is the foundation of energy reduction and decarbonisation, and it's the easiest place to begin: a single measurement point starts the whole process.
The largest gains are visible here, and the insights gathered point you to the next best place to focus for maximum return. Whole-building monitoring uncovers high-usage patterns while revealing issues and opportunities in your power quality.
Protect equipment, cut waste
We have delivered millions of pounds of energy savings and thousands of tonnes of CO₂e reductions by monitoring and optimising power quality for our clients. Gain real insight into the health of your electrical system, identify disturbances and optimise consumption.
Assess supply voltages, total harmonic distortion and power factor to protect your equipment and improve overall operational efficiency, while uncovering the savings opportunities that whole-building data alone can miss.
Down to the circuit, room or tenant
Sub-metering monitors each load within a building, letting you visualise energy flow through individual rooms, machines, processes or tenants, and make granular decisions about where to reduce. It works two ways. First, individual load monitoring pinpoints specific inefficiencies and confirms that an energy-saving measure stays in place and keeps working long-term.
Second, accurate cost allocation. Our MID-approved (Measurement Instruments Directive) sub-metering allocates costs within a business or bills tenants directly, with the regulated accuracy that financial statements require. Suitable for office buildings and industrial parks alike, it deploys quickly and offers excellent value. The Go Monitor Cloud user hierarchy even lets tenants access their own usage data, empowering them to cut their own costs and drive their own sustainability agenda.
One platform, every source
Bring electricity, generation, sub-stations and other utilities together in the Go Monitor Cloud for a single, accurate picture of your whole estate.
AMR (Automatic Meter Reading)
Straightforward wired or wireless reading that integrates with your existing meters, or new meters to suit. Capture compliant meter data through our web portal, 24 hours a day, with no need to visit site.
Generation monitoring
Track production from Solar PV, CHP, wind, biomass and heat networks alongside your import metering. Measure net consumption and grid contribution, and spot opportunities for generation and storage.
Sub-station monitoring
Monitor critical LV and HV transformers to ensure reliability and prevent downtime. Compare HV network performance against your LV sub-stations to detect losses and reveal usage patterns worth optimising.
Gas, water & heat
Easily integrate your other utilities into the Go Monitor Cloud to optimise overall resource use and cost. Heat and flow metering builds an accurate picture of energy transfer through your heating systems.
The toolkit behind the service
Some of the key technologies we use to deliver class-leading monitoring, chosen to fit your site, your meters and your budget.
4G / WiFi / Ethernet devices
Flexible connectivity for any networking environment, secured with the latest encryption. Our roaming cellular solutions work globally to accelerate and simplify enterprise deployments.
LoRaWAN wireless
LoRaWAN-enabled AMR with real-time transmission, extended coverage and exceptional range. Ideal for challenging sites, and lets you combine energy data with operational sensor data on one platform.
Energy-harvesting CTs
Innovative split-core current transformers that deploy as wireless sensors and never need a battery change. They transmit over LoRaWAN and integrate with your local BMS where required.
Leverage existing meters
Our solutions integrate seamlessly with existing infrastructure to minimise disruption and maximise compatibility. Where appropriate we supply the latest MID-approved hardware for regulatory compliance.
Single & three-phase
Solutions for both single-phase and three-phase electrical systems, scaling from large industrial supplies right down to small circuits in offices and residential buildings.
MID-compliant metering
Approved MID meters for any application where regulatory compliance matters. If data feeds billing or financial statements, the meter needs a compliant level of accuracy. Our team helps define your requirements.
Rogowski coils
For large installations and sites with challenging conditions, flexible Rogowski coil solutions make accurate current measurement possible where rigid CTs simply won't fit.
DC circuit monitoring
Custom-built monitoring for specialist DC applications, from solar strings to telecoms and EV infrastructure. Talk to us about the requirements for your deployment.
Go Monitor Cloud integration
Every solution integrates seamlessly with the Go Monitor Cloud Platform, bringing all of your energy, utility and sensor data into a single, secure place.
From raw data to real decisions
The Go Monitor Cloud Platform doesn't just show your energy use, it turns it into action. Calculate cost savings in real time for measures like voltage optimisation (VO), and report carbon accurately using live data from the National Grid.
- Real-time cost-saving calculations for VO and other measures
- Live carbon reporting using real-time National Grid data
- Import, export and generation tracked side by side
- Tenant user hierarchy and white-label client access
- Automated reports plus API access for BMS and CAFM
Ready to embark on your IoT journey?
Tell us about your site and we'll map the right monitoring solution, from a single measurement point to your whole estate.
Know exactly where
your energy goes
All types of metering, power quality, AMR and billing. Measure and visualise energy use across your whole estate, then turn that data into lower costs and lower carbon.
Visibility is the foundation of energy reduction
With energy costs rising, businesses need to understand exactly how they use power. By measuring and visualising the energy patterns of the whole building and each key process, you can start making impactful decisions that cut energy, cost and carbon.
In our experience, substantial savings are often possible from even basic monitoring data. The critical part is continuing to monitor long-term: new insights keep emerging, and savings measures that were put in place can quietly drift over time.
Changes in hardware and turnover in staff leave gaps in process and knowledge. A Go Monitor system baselines your usage and alerts you the moment inefficiencies start to creep back into your organisation.
Start with the big picture
Visualise how your whole building, business park or international estate is using and generating energy. High-accuracy monitoring at this level is the foundation of energy reduction and decarbonisation, and it's the easiest place to begin: a single measurement point starts the whole process.
The largest gains are visible here, and the insights gathered point you to the next best place to focus for maximum return. Whole-building monitoring uncovers high-usage patterns while revealing issues and opportunities in your power quality.
Protect equipment, cut waste
We have delivered millions of pounds of energy savings and thousands of tonnes of CO₂e reductions by monitoring and optimising power quality for our clients. Gain real insight into the health of your electrical system, identify disturbances and optimise consumption.
Assess supply voltages, total harmonic distortion and power factor to protect your equipment and improve overall operational efficiency, while uncovering the savings opportunities that whole-building data alone can miss.
Down to the circuit, room or tenant
Sub-metering monitors each load within a building, letting you visualise energy flow through individual rooms, machines, processes or tenants, and make granular decisions about where to reduce. It works two ways. First, individual load monitoring pinpoints specific inefficiencies and confirms that an energy-saving measure stays in place and keeps working long-term.
Second, accurate cost allocation. Our MID-approved (Measurement Instruments Directive) sub-metering allocates costs within a business or bills tenants directly, with the regulated accuracy that financial statements require. Suitable for office buildings and industrial parks alike, it deploys quickly and offers excellent value. The Go Monitor Cloud user hierarchy even lets tenants access their own usage data, empowering them to cut their own costs and drive their own sustainability agenda.
One platform, every source
Bring electricity, generation, sub-stations and other utilities together in the Go Monitor Cloud for a single, accurate picture of your whole estate.
AMR (Automatic Meter Reading)
Straightforward wired or wireless reading that integrates with your existing meters, or new meters to suit. Capture compliant meter data through our web portal, 24 hours a day, with no need to visit site.
Generation monitoring
Track production from Solar PV, CHP, wind, biomass and heat networks alongside your import metering. Measure net consumption and grid contribution, and spot opportunities for generation and storage.
Sub-station monitoring
Monitor critical LV and HV transformers to ensure reliability and prevent downtime. Compare HV network performance against your LV sub-stations to detect losses and reveal usage patterns worth optimising.
Gas, water & heat
Easily integrate your other utilities into the Go Monitor Cloud to optimise overall resource use and cost. Heat and flow metering builds an accurate picture of energy transfer through your heating systems.
The toolkit behind the service
Some of the key technologies we use to deliver class-leading monitoring, chosen to fit your site, your meters and your budget.
4G / WiFi / Ethernet devices
Flexible connectivity for any networking environment, secured with the latest encryption. Our roaming cellular solutions work globally to accelerate and simplify enterprise deployments.
LoRaWAN wireless
LoRaWAN-enabled AMR with real-time transmission, extended coverage and exceptional range. Ideal for challenging sites, and lets you combine energy data with operational sensor data on one platform.
Energy-harvesting CTs
Innovative split-core current transformers that deploy as wireless sensors and never need a battery change. They transmit over LoRaWAN and integrate with your local BMS where required.
Leverage existing meters
Our solutions integrate seamlessly with existing infrastructure to minimise disruption and maximise compatibility. Where appropriate we supply the latest MID-approved hardware for regulatory compliance.
Single & three-phase
Solutions for both single-phase and three-phase electrical systems, scaling from large industrial supplies right down to small circuits in offices and residential buildings.
MID-compliant metering
Approved MID meters for any application where regulatory compliance matters. If data feeds billing or financial statements, the meter needs a compliant level of accuracy. Our team helps define your requirements.
Rogowski coils
For large installations and sites with challenging conditions, flexible Rogowski coil solutions make accurate current measurement possible where rigid CTs simply won't fit.
DC circuit monitoring
Custom-built monitoring for specialist DC applications, from solar strings to telecoms and EV infrastructure. Talk to us about the requirements for your deployment.
Go Monitor Cloud integration
Every solution integrates seamlessly with the Go Monitor Cloud Platform, bringing all of your energy, utility and sensor data into a single, secure place.
From raw data to real decisions
The Go Monitor Cloud Platform doesn't just show your energy use, it turns it into action. Calculate cost savings in real time for measures like voltage optimisation (VO), and report carbon accurately using live data from the National Grid.
- Real-time cost-saving calculations for VO and other measures
- Live carbon reporting using real-time National Grid data
- Import, export and generation tracked side by side
- Tenant user hierarchy and white-label client access
- Automated reports plus API access for BMS and CAFM
Ready to embark on your IoT journey?
Tell us about your site and we'll map the right monitoring solution, from a single measurement point to your whole estate.